SRAM Force eTap AXS 12-Speed Road Hydraulic Shift/Brake Lever & Caliper Right/Rear 1800mm Black — AXS Wireless, Flat Mount, Bleeding Edge

SRAM Force eTap AXS HRD Shift/Brake Lever and Hydraulic Disc Caliper (ED-FRC-D1) is the right-hand lever for 12-speed eTap AXS road and all-road bikes, supplied with its matching flat-mount hydraulic disc caliper on an 1800 mm rear hose. It operates the rear brake, and its shift paddle moves the rear derailleur to a harder gear over SRAM's AXS wireless protocol — so there is no shift cable, junction box or internal wiring to route. It ships pre-bled from the factory with the hose already attached to the lever.

Key Features

• ✓ Wireless AXS electronic shifting with SRAM's simple eTap logic — the right paddle moves the rear derailleur to a harder gear, and pressing both levers' paddles together makes a front shift on a 2x setup
• ✓ Supplied with the matching two-piece flat-mount hydraulic disc caliper (20 mm offset hardware) on an 1800 mm rear hose, pre-bled at the factory
• ✓ Independent Reach Adjust and Contact Point Adjustment, with textured shift paddles and hood covers for control in the wet
• ✓ Bleeding Edge bleed port for clean, quick servicing; Stealth-a-majig connected hose routing; stainless steel caliper bolts; one Blip port per side for satellite shifters
• ✓ Runs SRAM High-Performance DOT 5.1 brake fluid (DOT 4 also permitted — never mineral oil or DOT 5), with steel-backed organic pads fitted from the factory

Specifications

What's in the Box

• • 1× SRAM Force eTap AXS HRD shift/brake lever, right/rear, with 1800 mm hose attached (00.7018.393.001)
• • 1× flat-mount hydraulic disc caliper, 20 mm offset, with organic brake pads fitted
• • Rotor and mounting bolts are not included — sold separately